Skip to product information
FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
  • FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black
FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black

FLEXIMOUNTS Overhead Garage Storage Rack - Adjustable Heavy-Duty Metal System, 4x4 Ft, 350lbs Capacity, Satin Black

$341.95
  • NOTE: The 71-inch axle length exceeds the dimensions of the 4'x4' deck. Please ensure the supporting beam has adequate length. The rack is compatible with 12'', 16'', or 24'' ceiling joist spacing (note: not compatible with 18-inch joist spacing). The wire deck reaches its highest point at approximately 10 inches below the ceiling.
  • LIFTING DESIGN: With the included hand crank or power drill (not included), you can easily raise and lower the garage storage rack, eliminating the need for a ladder.
  • STRONG AND SAFE: The double rope design offers extra safety compared to a single rope. The pressure-rivet design ensures a secure connection, preventing any risk of the shelf falling. Additionally, a specially designed safety lock keeps it firmly in place when not in use.
  • HIGH QUALITY: Constructed with heavy-duty steel and premium hardware, this product is rigorously tested to handle a total of 600 lbs, ensuring unmatched safety and durability. Safely loads up to 350 lbs.
  • 4X4 FT SPACE: Make the most of your garage's 4x4 ft space with the lifting storage rack. It offers a perfect solution to store seasonal and unused items.
  • We provide an installation template as well as paper and video instructions to assist you with a quick setup. If you have any questions, our professional customer service team is available to assist you 24/7.

garage storage GL1
garage storage GL1
garage storage GL1
garage storage GL1
garage storage GL1

  • No, it cannot. The shelving unit would tilt, posing a risk of items falling.

  • The ceiling should be constructed of wooden beams or concrete. If wooden beams, the appropriate beam spacing is 12/16/24 inches. And the length of the axle is 71”, please make sure the beam is of sufficient length.

  • We sincerely recommend ceilings not exceeding 9 feet. The maximum length of the pole used for raising or lowering the deck is 4 feet, so if the ceiling is higher than 9 feet, you may need to stand on a ladder to reach the pole.

  • Please ensure the following four points during installation: Was it installed using installation template? Is the ceiling level? Is the installation distance correct? Is the direction of the rotating handle correct?

  • If the rope passes through the axle from below, it indicates an incorrect rotation direction of the pole. Please lower the wire deck to its lowest position and rotate the winding pole COUNTERCLOCKWISE to raise the deck.

You may also like